Alle Artikel

October 16, 2026

5 Precision Manufacturing Trends Shaping 2026

August 25, 2026

AMFG Launches Machining Strategy to Reimagine Custom Part Estimating Software

August 24, 2026

The Cost of Tribal Knowledge for Machine Shops

Eliminating Silent Downtime with Software

Thinking to Start a Machine Shop? Here’s What You Need to Know.

Machine Shop Estimating and Quoting Software Explained

Only in Ohio: Where Manufacturing Is At The Heart Of It All

Is Nearshoring The Next Big Thing?

A road labelled "manufacturing careers" with an entry barrier labelled "quoting"

February 25, 2026

Lowering the Quoting Skills Barrier

February 18, 2026

Why Are There So Few Women in Manufacturing?

A picture of Matt Guse. He is looking into the camera and smiling. Behind him is the American flag. He is wearing a black t-shirt with a white collar, and a black baseball hat, both of which have MRS Machining stamped onto them.

January 30, 2026

Giving Back to Manufacturing – an interview with Matt Guse

January 19, 2026

Aufbau einer widerstandsfähigen Lieferkette im Jahr 2026

Adaero is partnering with AMFG

December 10, 2025

AMFG und Adaero arbeiten zusammen, um die Hürden beim Erlernen von Kalkulationsfähigkeiten zu senken.

PFS is partnering with AMFG

December 4, 2025

PFS Contract Manufacturing Halves Quoting Times With AMFG

Autodesk and AMFG's logos

November 18, 2025

AMFG and Autodesk Collaborate to Launch a Groundbreaking Integration

A man in a control room using AMFG and Photocentric's software

November 17, 2025

AMFG, Photocentric und APWorks schließen sich zusammen, um intelligente Orbitalfertigungskapazitäten zu entwickeln.

The US flag, and just below it, the flag of Indiana

November 11, 2025

Industry in Indiana - Manufacturing in The Hoosier State

Busch Brothers Machining is partnering with AMFG

November 5, 2025

Busch Brothers Machining triples their RFQ response speed with AMFG

3D Print Bureau is partnering with AMFG

October 28, 2025

3D Print Bureau Speeds Up Quoting With AMFG’s Instant Quoting Tool

A manufacturer drowning in a pile of cogs

October 24, 2025

The RFQ Tidal Wave Coming for Manufacturers

A map, with a house in the middle. Around the house are boats and factories, with arrows pointing towards the house.

October 17, 2025

Kann Automatisierung dazu beitragen, Reshoring Wirklichkeit werden zu lassen?

Two men sitting on a sofa. On the left is Henry Morris, on the right is Johnny Goode. They are smiling, and mid conversation.

October 10, 2025

Lehren aus der Strafverfolgung: ein Interview mit Johnny Goode

A dirty hand holding a piece of metal while it is being drilled on a machine

October 3, 2025

Ist die Fertigung schmutzig, gefährlich und langweilig?

A black and white picture of Keyvan Karimi, smiling into the camera.

September 18, 2025

AI's impact on manufacturing: an interview with Keyvan Karimi, CEO of AMFG

A picture of Meghan Ziemba. She is smiling.

September 12, 2025

Interview mit einer Expertin aus der Fertigungsbranche: mit Meaghan Ziemba

Two men sitting on a sofa. On the left is Henry Morris, on the right is Johnny Goode. They are smiling, and mid conversation.

September 11, 2025

Lessons from Law Enforcement: an interview with Johnny Goode

A3D is partnering with AMFG

September 10, 2025

AMFG and A3D Manufacturing Partner to Optimize End-to-End Production Workflows

A map showing the top ten global manufacturers (China, USA, Japan, Germany, India, South Korea, Mexico, Italy, France, Brazil)

August 29, 2025

How Education Gets Brazil Into The Top 10 Manufacturers

Stack3D is partnering with AMFG

August 12, 2025

Stack3d upgrades their quoting speeds with AMFG's award-winning MES software

A manufacturer looking annoyed. On his left is a man saying "I need + or - 0.0005 tolerance" and on his left is a woman saying "Finish it in 24 hours!"

How do you know when to turn down RFQs?

IPFS is partnering with AMFG

IPFL Modernises Their Workflow with AMFG’s Quoting and Automation Software

A picture of Tony Gunn, in a black t-shirt and wearing white corded earphones. He is smiling, and sitting in front of shelves which are full of books, pictures, and trophies.

Loss, Opportunity, and AI: an interview with The WorldWide Machinist, Tony Gunn

A manufacturer working out a quote

How to Adapt Your Quoting Strategy in a Changing Environment

The American flag and the Massachusetts flag

The Bay State: Manufacturing in Massachusetts

A hand holding a mobile phone. Around the phone are symbols of social media.

The Influencers of Manufacturing

BensonsCNC is partnering with AMFG

BensonsCNC now offers instant quoting with AMFG’s tailored software

Latest Developments in Additive Manufacturing: June 2025

Introducing Sentinel AI, the new 2D drawing analysis tool.

AMFG bringt Sentinel AI auf den Markt, ein neues Tool, das PDF-Dateien in weniger als 3 Sekunden analysiert.

The American flag, and just below it, the Texas flag

Made in Texas: Manufacturing in the Lone State

5 Ways 3D Printing is Being Used in Formula One in 2025

A futuristic car, flying

Machining is taking us Back to the Future

3D-Druck im Weltraum: Ein Leitfaden zur additiven Fertigung auf dem Mond und in der Umlaufbahn

AMFG and UAB Protozauras Collaborate to Accelerate Custom Part Quoting

two younger workers, learning from an older man

5 Tips For Fixing The Skills Gap in CNC Machining

Marketing Your 3D Printing Business: A Crash Course

3D Printing Mass Production: 8 Success Stories

A photo of Oscar Piastri being covered in champagne after winning a race

McLaren's winning formula: from CNC machining to the podium

5 Reasons Why Traceability is Crucial for Additive Manufacturing

Latest Developments in Additive Manufacturing: May 2025

5 Key Barriers to Discrete Manufacturing And How to Overcome Them

Additive Construction 2025: How and Why Companies are 3D Printing Buildings

Vapour Smoothing in 3D Printing: An Introduction

The Importance of Digitization for Hybrid Manufacturing

Latest Developments in Additive Manufacturing: April 2025

Bioprinting Humans: How Close Are We to the Science of Mickey 17?

From Chanel to Alpine: 3D Printing Mass Production with Erpro Group CEO Cyrille Vue

Portable 3D Printing: Additive Manufacturing in the Field

Lessons From RAPID + TCT and AMUG 2025

Deep Tech and 3D Printing: Transforming Advanced Manufacturing

3D Printing in the Maritime Industry: A Comprehensive Guide

How Additive Manufacturing is Improving Semiconductor Production

Eco 3D Parts Implements AMFG to Enhance Productivity

Latest Developments in Additive Manufacturing: March 2025

How 3D Printing Enables Same-Day Dentistry

Digital Twins and 3D Printing: Revolutionising Manufacturing

How 3D Printing is Revolutionising Eyewear

T-Code: The Future?

How to Avoid Downtime in Additive Manufacturing

5 Exciting Innovations in 3D Printers

February 27, 2025

Latest Developments in Additive Manufacturing: February 2025

February 26, 2025

Three Ways Additive Manufacturing is Changing Supply Chain Management

February 19, 2025

Application Spotlight: 3D Printed Hearing Aids

February 18, 2025

AMFG Announces ISO 27001 Certification

February 14, 2025

Additive Manufacturing Forecast 2025: 5 Tips for Success

February 12, 2025

Additive Manufacturing Forecast 2025: Market

February 7, 2025

Trump's Tariffs: What Do They Mean for Additive Manufacturing?

February 5, 2025

Additive Manufacturing Forecast 2025: Technology and Applications

January 30, 2025

Latest Developments in Additive Manufacturing: January 2025

January 28, 2025

The Essential CMMC Guide for Job Shop Owners: A Comprehensive Roadmap to Cybersecurity Excellence

January 22, 2025

Additive Manufacturing in 2024: A Summary

January 16, 2025

Three Takeaways from 2024 Additive Manufacturing Awards

January 9, 2025

ITAR Compliance for Job Shops: What You Need to Know

December 19, 2024

State Feature: California

December 17, 2024

Will Private Equity Take Over Custom Part Manufacturing?

December 6, 2024

AMFG at Formnext: A Week of Innovation, Insights, and Impact

December 5, 2024

Precision Mold and Machining Turbocharges Quoting Process with AMFG, Slashing Times by 86%

December 3, 2024

What Does Trump 2.0 Mean for Job Shops?

October 30, 2024

Exploring Machining Education with Jacob Pedersen

October 11, 2024

Expert Interview: Alex Cairns on Getting Manufacturing Moving

October 8, 2024

Why We Need More Women in Manufacturing

October 8, 2024

Latest Updates in Sustainable Additive Manufacturing

September 26, 2024

Swope Design Solutions Cuts Quoting Times by 95% with AMFG

September 25, 2024

Are Robots the Future of CNC Milling?

September 24, 2024

The Digital Manufacturing Centre Integrates AMFG MES Software To Increase Operational Efficiency

September 24, 2024

People Make Manufacturing: Employee-First Companies

September 18, 2024

Machining Takeaways from IMTS

September 12, 2024

Bringing Back Businesses: The Potential and Challenges of Reshoring

September 12, 2024

Expert Interview: Howard Sheldon on Championing British Manufacturing

September 11, 2024

Additive Manufacturing A Game Changer for Sports

September 6, 2024

Expert Interview: Yanesh Naidoo on The Legacy of Industry 4.0